SunDcreate blue color 3d printer filament PLA/ABS 1.75mm/3mm 1kg Consumables Material MakerBot/RepRap/UP/Mendel Hot sale

After payment, please leave a message, what color, material and size do you want.

For example: red ABS 3.00mm 1roll, blue PLA 1.75mm 2rolls. Thank you.

3D Printer Filament 1.75mm/3.0mm ABS/PLA

Size:1.75mm/3.00mm±0.05mm

Length:

1kg 1.75mm ABS - 400m

1kg 3.0mm ABS - 135m

1kg 1.75mm PLA - 350m

1kg 3.0mm PLA - 115m

Printing Temperature:

ABS: 230 - 270° C

PLA: 200 - 250° C

What's in the Package:

1kg spool 3D printer filament(Each volume contains one kilogram of material, together with reels, desiccant, vacuum bags, paper boxes, A total of 1.35 kg)

Dimensions: 200 x 200 x 65mm

Inner Diameter: 56mm

Net Weight:1kg/2.2lb

Color:

ABS(28 colors): natural, transparent, white, black, red, green, yellow, blue, orange, purple, pink, grey, silver, gold, golden yellow, coffee, water-blue, transparent red, transparent green, transparent yellow, transparent blue, transparent orange, transparent purple, fluo-red, fluo-green, fluo-yellow, fluo-blue, fluo-orange.

PLA(27 colors): natural(translucent), white, black, transparent red, transparent green, transparent yellow, transparent blue, transparent orange, transparent purple, pink, grey, silver, gold, golden yellow, coffee, water-blue, solid red, solid green, solid yellow, solid blue, solid orange, solid purple, fluo-red, fluo-green, fluo-yellow, fluo-blue, fluo-orange.

ABS Filament and PLA Filament is commonly used in 3D printing, has the following characteristics:

1. High strength, good toughness.

2. Density is small, when printing larger volume model lighter, save money.

3. Cost-effective, can be processed in wide range temperature.

4. ABS softer than PLA.

5. PLA has low shrinkage rate, even print larger models perform well.

6. 1 kg /plastic spool packaging, can be automatic feed.

7. To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.

8. No Bubble.

1. All of our 3D printer filaments are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.

2. Before the mass production, our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.

3. The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.

4. To keep the filaments dry, each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.